January 24, 2021 - Micropower Direct’s MSR192K-16A is a switching voltage regulator that provides up to 16A of output current.
The MLSR192K-16A operates from an 8.3 to 14 VDC input, producing a single tightly regulated output at up to 16A. The output can be adjusted over a range of 0.7525V to 5.0V. Standard features include efficiency as high as 95%, low noise operation and tight line/load regulation. Protection against short circuit and over current faults is standard.
The MSR192K-16A is protected against short circuit and over current faults. A control input allows the unit to be turned on/off remotely. Units are available featuring positive or negative logic for this feature. The MTBF of the MSR192k-16A series is greater than 1.0 Mhours (per MIL HDBK 217F).
Fabricated as a miniature, unpotted (open board) unit, the MSR192k-16A is only 1.299 x 0.531 x 0.327 inches (33.00 x 13.50 x 8.30 mm). The pin-out is industry standard. Each model is specified for operation over the industrial operating temperature range of -40°C to +85°C with no heat sinking required. Cooling is by free-air convection.